<img height="1" width="1" style="display:none;" alt="" src="https://dc.ads.linkedin.com/collect/?pid=230754&amp;fmt=gif">

RF Venue’s Customers Drive its Success

  • Singular focus: No RF dropouts or interference, so your message is heard
  • Proven technology: Over 10,000 global installations
  • Continuous innovation: RF Venue provides equipment unique in the industry, challenging old myths and assumptions with patented products that address the biggest challenges in RF
  • Broad applicability: RF Venue products work with any brand wireless microphone or IEM system
  • Trust: RF Venue customer satisfaction score is twice as good as the average company’s. And its Net Promoter Score is +67—few companies anywhere have a better one
  • Affordability and reliability: RF Venue products usually cost the same as or less than products from other companies. Example: Two antennas can be replaced with just one RF Venue Diversity Fin antenna — superior performance at lower cost

About RF Venue

BPF Bedfore and After GIF_OPTIMIZED

RF Venue band-pass filters help eliminate "out of band" signals that can saturate the front end of wireless microphone receivers and can greatly improve dynamic range by reducing noise and third party interference outside the range of operation.

Featuring industry standard BNC connectors and a small 3" x 1.75" footprint, these hand-tuned band-pass filters require no power or user configuration and can be easily connected in-line with wireless microphone antennas to reduce noise and improve wireless system performance.


470-608 MHz Band-pass Filter Compatibility

  • Works with most wireless microphones
  • Optimized for use in the United States

470-698 MHz Band-pass Filter Compatibility

  • Works with most wireless microphones

470-530 MHz Band-pass Filter Compatibility

  • Shure G50, G1
  • Audio-Technica DE2


470-560 MHz Band-pass Filter Compatibility

  • Shure G50 and H5
  • Sennheiser A and A1
  • Sennheiser 6000/9000 Low Band
  • Lectrosonics Blocks B19, B20 and B21


530-590 MHz Band-pass Filter Compatibility

  • Audio-Technica EE1
  • Shure H50


560-608 MHz Band-pass Filter Compatibility

  • Shure J1 and J3
  • Sennheiser G
  • Sennheiser 6000/9000 High Band
  • Lectrosonics Blocks B22 and B23


Simply connect the band-pass filter in-line with your wireless microphone remote antenna connections for 40 dB of side rejection. Note: (2) required for diversity wireless microphone systems.


Most common questions asked:

Can I use the band-pass filters with active antennas?

Band-pass filters do not pass DC bias required for active antennas.

Customer Feedback